Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
Satin Stitch Primer copy
Satin Stitch Primer
How do I solidly fill in a shape? And how long can I make my stitches? And what if they don't look nice around the edges and I cry? Whoah now. You can fill up a shape with stitches any number of ways (concentric split stitches, random straight stitches, fill it with French knots), but a satin stitch is a good method to know. (Doesn't have to actually be worked in or on satin, fyi.)
Step 1: Let's say you have a space on your pattern you want to fill in. Like this.
Step 2: Start by bringing your needle up from behind your hoop, along the pattern line. I think it's easier to start in the middle of the shape and work outward toward each end. Imagine if this were a circle: spanning the diameter first is much easier than trying to start at the outer edge.
Step 3: Re-insert your needle directly across from your last exit
point. You'll be making stitches that span all the way across the
shape. See where I'm going with this?
Step 4: Pull the floss all the way through, and there you have your first stitch in the process! Okay, now pay close attention to this next, important step:
Step 5: Start your next stitch across from, but not next to, the end of your last stitch. You'll do this every time. Don't try to make your next stitch come up right beside the end of the last one -there won't be enough fabric in between, and you'll have a little gap of fabric peeking through each stitch, when we want them as close to side-by-side as possible.
Step 6: This is what I mean. "1" is where you first came up, "2" is where you went back down, "3" is where you'll come up next, "4" is where you go back down again...and repeat. Your next stitch will always start across from the end of the last one. This also means that the back of your fabric will look the same as the front! Or, did you already figure that out? Smarty.
Step 7: Then have at it! Stitch toward one end, getting smaller
and smaller...yes, it can get tricky. Especially around the bend. Don't
give up!
Step 8: Finish the other half! It will probably look really terrible to you. Stop looking at it. Set it down, forget about it, and then pick it up again later. I bet you will be surprised by how nice it looks.
Working this way (doing the shape half-and-half) is just a personal preference of mine. You can instead start your first stitch at either end with the smallest point. I find that I get neater results if I work this way. Just me?
Wanna see what it can really look like?
Vintage Linen from my Collection
Don't let this fine example scare you away! It's one of the loveliest examples of satin stitching I've found -at a yard sale. If you look closely, they've alternated short stitches with longer stitches in the areas that are really narrow. A treasure of satin stitchery. (The word "his" measures just a little over 2" wide, btw.)
Don't let this fine example scare you away! It's one of the loveliest examples of satin stitching I've found -at a yard sale. If you look closely, they've alternated short stitches with longer stitches in the areas that are really narrow. A treasure of satin stitchery. (The word "his" measures just a little over 2" wide, btw.)
What about uneven edges? If you really don't like the way your edges look (too jaggy?) then you can go outline the whole thing in a split stitch or back stitch (or French knots) to cover up your uneven edges (and make it really pop -especially if you use another color).
But, I bet it doesn't look as bad as you think it does. xo
Got that? Ready for more?
More website tutorials are here, but if you want free patterns, instructional PDFs, discounts codes, Sublime Stitching news and links to our new embroidery videos then you should probably subscribe to my newsletter!
Already subscribe? Too cool! See you there!
Invalid password
Enter
